- Unique Reflector Design To Provide Good Distance And Width For Highway Driving.
- Reflector Design Limits Light Being Reflected Off Vehicle Bonnet And Bar Work
- Combo Beam Technology Provides Excellent Mid- To Long-Range Spread As Well As Distance Down The Road
- Virtually Indestructible Hardened Polycarbonate Lens
- Extruded Aluminum Body With Stealth Back Powder-Coat Finish
- Unique Multi Position Mounts Suitable For Arb Base Rack, Arb Trade Rack And Touring Racks
- Brackets Included Provide Two Mounting Options Dependent On Roof Rack
- 304 Stainless Hardware & Brackets
- Reverse Polarity Protection
- Breather With Pressure-Tested Seal
- Vibration And Uv Tested
- Thermal Management
- Dust And Waterproof To Ip68
- Over And Under Voltage Protection
- Protected Against Radio Frequency (Rfi) And Electromagnetic (Emc) Interference
- Two-Pin, Over-Molded, Waterproof Plug
- Suitable To Use With Arb Driving Light Loom - 3500810 & 3500820
- Amber, Clear And Solid Black Clip On Lens Covers Sold Separately - 2 Packs Required For Full Cover
Complementing The Sleek Design Of The Arb Base Rack And Using The Unique Mounting System Of The Arb Base Rack, Arb Has Added To Its Family Of Driving Lights A New Dedicated Roof Mounted Light Bar. Using A Unique Reflector Design To Limit Reflection Off Bar Work And The Vehicle And Pumping Out A Competitive 1Lux @ 700+ Meters This Light Is A Great Addition To Your New Base Rack Or Arb Rack Setup.
Manufactured From Extruded Aluminum With High Pressure Die Cast Aluminum Caps Provides Superior Strength And Heat Dissipation Chassis, This Provides Great Longevity To The Leds And Allows For A Couple Of Knocks And Bangs From Low Hanging Branches When Out On The Trails. The Body Is Fully Powder Coated In A Stealth Black Finish And A Light Tint Was Added To The Polycarbonate Lens Providing A Non-Obtrusive Look And Sometimes Disappears Into The Base Rack Setup On The Vehicle.
Tuned Reflectors On The Arb Slimline Roof Rack Light Reduces Light Bounce Back From The Vehicle Mounted To And Bar Work, Reducing Glare Coming Into The Cabin And Getting Light To Where It Needs To Be, Down The Road. The Unique Half Cup Reflector With Low Mount Led Provides A Defined Beam Line That Has Been Tuned Into A Spot/Flood Or Combo Configuration. This Setup Provides Up To 728M @ 1 Lux And Up To 60M Spread Of Light.
Using The Uber Cool Mounting System Built Into The Arb Base Rack Allows The Light To Be Setup In Minutes With Different Mounting Options Being In Front Of The Rack And Mounted Below The Rack To Provide Additional Protection And That Hidden Look. The Light Can Also Be Added To Most Arb Roof Racks, But Drilling Will Be Required. All Brackets Are Included With The Light.
Features